Wire mesh demister

Wire mesh demister	Wire mesh demister
Wire mesh demister	Wire mesh demister

Wire Mesh Demister

Wire Mesh Demister is made of Wire Mesh, Grids, Support Ring, and depression bar. And the demisters are in many Parts in the tower that the diameter is big. The Size of the Parts must be fixable for the entrance of tower. Between the grids up and down， Folded the ribbon wire mesh, usually is 120°. Put in the fit height, then use metal wire to connect the mesh and grids. When fixing, the grids must closed to mesh and tower, no space exit. Besides, we should consider when design, the surface that grids take should less than 10%.

Mesh thickness usually between 100-150mm. When the speed of air be 1-3m/s, the liquid more than 5um， can be 99% effence. When Pressure less than 25*9.81Pa. Sometimes,， We make the mesh as corrugated, Wave dispersion 4mm, and Auxiliary each layer 90" , In this Way,higher separation efficiency, lower Pressure drop.