Application and classification of screen eliminator

The wire mesh demister is mainly composed of wire mesh, wire mesh grid and fixed wire mesh block supporting device, wire mesh for various materials of gas-liquid filter mesh, gas-liquid filter mesh is composed of metal wire or non-metal wire. The non-metallic wire of the gas-liquid filter net is made of many non-metallic fibers, and it can also be a single strand of non-metal wire. The wire mesh defoamer can not only filter out larger droplets suspended in the air stream, but also filter out smaller and smaller droplets. It is widely used in gas-liquid separation devices in chemical, petroleum, tower manufacturing, pressure vessels and other industries.

Wire mesh demister (demister) is used to separate the droplets entrained by gas in the tower to ensure mass transfer efficiency, reduce valuable material loss and improve the operation of compressor after the tower. The spray droplets of 3-5um can be effectively removed. If a demister is installed between the trays, not only the mass transfer efficiency of the trays can be guaranteed, but also the spacing between the trays can be reduced. So the screen eliminator is mainly used for gas liquid separation. It can also be used for air separation by air filters. In addition, the wire mesh can also be used as a buffer for all kinds of instruments in the instrument industry to prevent the interference of radio waves, such as electronic shield. It has been widely used in chemical, petroleum, sulfuric acid, medicine, light industry, metallurgy, machinery, environmental protection industrial production.

Metal mesh demister, plastic mesh demister, PP mesh demister, drawer mesh demister, inlaid mesh demister, top mesh demister, bottom mesh demister, etc.

The wavy screen demister is also known as wave type demister and wave demister. It conforms to the new HG/T 21618-1998 standard and integrates the characteristics of HG5-1404-81, HG5-1405-81 and HG5-1406-81 silk mesh besides the foamer.

1. the effect of removing foam from screen mesh demister is obviously improved, and there is no phenomenon of entrainment in two ways.

2. The mesh block inclines 45 degrees, and the filtering area increases by 15%, and the direction and speed of the air flow can be adjusted to achieve high efficiency of defoaming.

3.4-10mm deep corrugated, one layer with two-layer filtration efficiency, saving installation space, reducing the cost of a single tower demister.